CADMaster® CAD/CAM and Porcelain Finishing and Polishing

CADMaster kits are a complete system for finishing and polishing all porcelains and CAD/CAM restorations in a sterilizable bur block. Developed and tested by leading CAD/CAM trainers, this new series allows users to choose either a two or three-step procedure. CADMaster kits are easy and fast to use and will achieve superior results on all porcelain restorations.

  • Go from sprue cut to high gloss in a two- or three-step procedure
  • Adjust, pre-polish and polish
  • CEREC®* and all CAD/CAM systems approved
  • Available in a sterilizable bur block
  • Use CADMaster kits for: porcelains and enamel

    CADMaster Brochure
CADMaster Kit (Friction-Grip)
  • A complete intraoral system
  • Dura-Green and Dura-White stones for adjustments
  • Diamond Robot points and T&F Hybrid points for fine adjustments
  • CeraMaster Coarse points for pre-polishing

PN 0350B • FG KIT
Dura-Green stones (FL2, 2 RD2), Dura-White stones (FL2, 2 RD2), 2 CeraMaster Mini-Points, 2 CeraMaster Coarse Mini-Points, Diamond Robot Point, T&F Hybrid Point (7406)

CADMaster Kit (Contra-Angle)
  • A complete intraoral system
  • Dura-Green and Dura-White stones for adjustment
  • CeraMaster Coarse points for pre-polishing
  • CeraMaster points for final polish

PN 0360B • CA KIT
Dura-Green stones (FL2, RD2, TC4, WH6), Dura-White stones (FL2, RD2, TC4), CeraMaster (bullet, WH6), CeraMaster Coarse (bullet, WH6)

CADMaster Kit (Handpiece)
  • A complete chairside system or lab system
  • Dura-Green and Dura-White stones for adjustment
  • CeraMaster Coarse points for pre-polishing
  • CeraMaster points for final polish

PN 0370B • HP KIT
Dura-Green stones (FL2, 2 RD2), Dura-White stones (FL2, 2 RD2), CeraMaster (bullet, knife, cup, mini-point), CeraMaster Coarse (bullet, knife, cup, mini-point)

*CEREC® is a registered trademark of Sirona